Stealth Bluetooth Helmet Set 201, the new bluetooth dimension with innovative design
 |
Feel the freedom of driving wireless - now also in HiFi-stereo quality
The fit for stereo Stealth Bluetooth Helmet Set 201 with an elegant design can be connected to any Bluetooth mobile phone, audio or navigation system that works with headset, hands-free or A2DP profile or to one of our PowerCom motorbike communication systems.
The Stealth Bluetooth Helmet Set 201 was developed for motorbikes and includes one Bluetooth box, one driving and wind noise compensated helmet microphone, two flat helmet loudspeakers, one replaceable battery and one travel charger.
The Stealth Bluetooth Helmet Set 201 is equipped with an integrated booster and offers therefore a comfortable communication even at high speeds, intelligibility at 140 km/h very good, 160 km/h good. [Road test].
Almost
invisible application due to Stealth design
Easy handling at helmets with neck guard, with the ergonomic design the
Stealth Bluetooth Helmet Set 201 can be integrated almost
invisibly and weather protected. At helmets without neck guard the electronic
box can be mounted on helmet bottom side by using the optionally available
protective bag.
The application possibilities:
 |
The Stealth Bluetooth Helmet Set 201 is suitable for
- All mobile phones with Bluetooth gateway with hands-free-profile
- All navigation systems with Bluetooth gateway with headset-profile
- All audio devices with Bluetooth gateway with A2DP- or headset-profile
- Every PowerCom motorbike communication system with BT helmet connector over A2DP- or headset-profile
- All other Bluetooth systems with A2DP-, Headset- or hands-free-profile
Examples of installation:
| Invisible (Stealth) installation inbetween helmet padding and neck guard All components are connected via polarity-safe mini plugs. Therefore easy assembly even under the helmet padding. Each component is assembled individually, then the cables are neatly placed and finally connected with the electronic box. The Stealth Bluetooth Helmet Set 201 offers enough volume in order to avoid the unsafe handling of buttons at the helmet. Therefore, an invisible installation, as shown here, is possible. To accept incoming calls from a connected mobile phone, etc. an external button is available that can be fixed to the helmet at any place.
|
|
|
Assembly of protective bag to bottom side of helmet If there is no place in the helmet or if a manual handling without an external button* is requested while driving, the electronic box of the Stealth Bluetooth Helmet Set 201 can be fixed under the helmet with the optionally available protective bag. *) To accept incoming calls from a connected mobile phone, etc. an external button or an external operating device can be fixed to the helmet at any place. |
Important features:
Electronic
box:
Bluetooth
transmitter/receiver with booster installed in a practical box for a discreet
assembly in your helmet. The
optimally to the shape of helmet adapted design is protected by law.
- Full
stereo wireless High-Sound-System
The new Stealth Bluetooth Helmet Set 201 is 100% Bluetooth 2.0 compatible, besides the standard profiles HSP and HFP it also supports A2DP and therefore offers a high quality stereo transmission to the helmet.
- Multiple
profiles possible
The new Stealth Bluetooth Helmet Set 201 can be paired with Bluetooth devices with several profiles and offers an automatic switching, e.g. to a mobile phone, if being called. After finishing the phone call the before connected Bluetooth device is automatically reconnected.
- Low-radiation
and high reach
Is this possible? After intensive research and development we were able to optimize the reach and get a low-radiation device at the same time. With a special antenna it is possible to get a reach of 250m / 0,16 miles (free field) with only 2,5 mW transmitting power.
- Highly
suitable for motorbikes
A noise compensating helmet microphone reduces the annoying driving noises, high quality electronics provides sufficient volume on the motorbike without any annoying interferences.
-
Stealth design
The electronic box was designed for invisible assembly in helmets, with the ergonomic form the Bluetooth device can be put between neck-guard and upholstery of the helmet. It is therefore weather-protected and invisible from the outside and not producing any wind noises.
- Easy
assembly
Polarity-safe and colour marked mini-connectors for every plug. The microphone and loudspeakers can each be assembled with Velcro fasteners and connected to the electronic box with mini-connectors. Unlike the preceding model, the control buttons have been counter-sunk so that they can not be activated by accident. Therefore, the electronic box can now be put more easily under the neck guard. An assembly, as recommended before, is no longer necessary.
-
Intercom function
In combination with the Stealt Helmet Set 201i it can be used as helmet-to-helmet communication system.
- Connection
for external operating device
The Stealth Bluetooth Helmet Set 201 offers a remote control connection, if manual handling is needed.
- Size of electronic box: Body 19 mm wide x 116 mm long x 5mm thick
- Weight:
Only 20 grams
 |
Microphone:
A noise compensating transducer reduces the driving noises and therefore
making it possible to get a comfortable voice transmission even at high
speeds.
- Noise compensated transducer for close talking systems
- Foam windshield for wind noise compensation and popp protection
- Sound characteristics for a clear voice communication even with driving noises
- No impact sound transmission, e.g. from the helmet shell
- Velcro fastener for easy assembly and also easy to disconnect from the electronic box
Loudspeakers:
Two flat loudspeakers with a diameter of 40 mm provide sufficient volume
for voice and music transmission.
- Two dynamic transducers
- Weatherproof plastic membrane
- Optimum sound feature for clear voice transmission
- Perforated cover to protect the membrane
- Easy assembly with adhesive/Velcro fastener on back, can be removed separately
Power supply:
The user-friendly Lithium-Ionen battery is connected to the
electronic box with plugs and can therefore be replaced at any time.
- Powerful Lithium-Polymer battery
- Replaceable with polarity-safe connectors
- Easy assembly in the helmet as to the small overall size
- Weight only 5 grams
- Size is only 20 x 40 x 5 mm
- Navigation voice mode: approx. 19 hours*
- All time music: approx. 6 hours*
- Stand by time: approx. 75 hours*
*)Operating time is strongly depending on operating mode.
Device connections:
Microphone, loudspeaker right / left, battery, charger, external operating device
Scope of delivery:
1 Electronic device, 2 Helmet loudspeakers, 1 helmet microphone, 1 Lithium polymer battery, 1 power charger, 1 Velcro fastener, 1 operating and installation instructionFrequently ordered parts to this article:
 |
 |
 |
|
 |
Stealth Bluetooth Helmset 201